6/26/2013

Error message when you try to send or to receive email in Outlook 2010 or Outlook 2013: 0x8004010F: Outlook data file cannot be accessed.

Error message when you try to send or to receive email in Outlook 2010 or Outlook 2013:
"0x8004010F: Outlook data file cannot be accessed"

Set up again the profile with correct settings.
Set as default.
You must delete demaged profile (email account, e.g.: IMAP).
After that, emails from "Outbox" folder will be sent out automatically.

Source: Microsoft


6/25/2013

Onboard NIC has correct IP address only after a full power off

Sometimes onboard NIC (network interface controller) has correct IP address (working well) only after a full power off (e.g Windows 7 / 8).
Make a full power off: unplug the PC from the power outlet for 20-30 seconds, then plug in.
If the error still remains, probably the mainboard injured.

6/24/2013

USB port error - Windows 7 / 8

Sometimes one or more USB port seems to be wrong in Windows 7.
First take a try with a LiveCD, so you can determine whether the operating system is good or not.
If it good, worth to make a full power off. Unplug the PC from the power outlet for 20-30 seconds, then plug in.
If the error still remains, probably the mainboard injured.

6/13/2013

Windows Remote Desktop connection (RDP) is lost when Kaspersky Endpoint Security 10 and Windows Firewall run at same time

Windows Remote Desktop connection (RDP) is lost when Kaspersky Endpoint Security 10 and Windows Firewall run at same time. ICMP packets will be discarded too.
Only one firewall program must be active.

Source: Kaspersky

6/12/2013

How to enable Windows Remote Desktop - Kaspersky Endpoint Security 8 and 10 Firewall

Kaspersky Endpoint Security:

Settings

Firewall
Network packet rules
Remote Desktop network activity
Edit
Action: Allow
Local ports: 3389 (default)
Address: as you need


OK
Save

Screenshots:







Enable Windows Remote Desktop:

Computer
Properties
Remote settings
Remote
Remote desktop
Enable as you need











6/11/2013

Alcatel X200 USB HSDPA modem Windows 8 driver

There is no Alcatel X200 USB HSDPA modem driver for Windows 8.
But you can use the Windows 7 driver as well.
Just right mouse click on 
install32.exe or install64.exe (depending on your version of Windows) and choose "Troubleshoot compatibility".
After it you need to test the program.
The installer will ask you to plug out and plug in the modem, and save settings.
After that click on the suitable installer version (
install32.exe or install64.exeand the Alcatel X200 USB HSDPA modem driver will be installed properly on Windows 8.

You can download the Windows 7 driver for Alcatel X200 USB HSDPA modem from here.
Another download link from Telenor Hungary.
Some sceenshot:








6/10/2013

Clean infected PC with free Kaspersky Rescue Disk

For cleaning an infected PC you can use Kaspersky Rescue Disk.
Download Kaspersky Rescue Disk from Kaspersky website (ISO), burn it to CD (eg. using ImgBurn).
Or download the iso image of Kaspersky Rescue Disk 10 and a special utility and use this utility to record Kaspersky Rescue Disk 10 to USB devices.
See: How to record Kaspersky Rescue Disk 10 to an USB device and boot my computer from it?
After burning CD or recording to USB device boot from CD or USB. and scan PC offline.
See: How to Use the Kaspersky Rescue Disk to Clean Your Infected PC

6/07/2013

Virtual Router - Free Software as Wifi Hot Spot for Windows 8 and Windows 7

(Update:
Windows 10 default feature:
Use your PC as a mobile hotspot)


Virtual Router is a free, open source software based router for PCs running Windows 8, Windows 7. You can wirelessly share any internet connection (Wifi, LAN, Cable Modem, Dial-up, Cellular, etc.) with any Wifi device (Laptop, Smart Phone, Netbook, etc.) These devices connect to Virtual Router just like any other access point, using WPA2.

Virtual Router download link.

6/05/2013

Installing HP Printer with an Alternate Driver in Windows 7 for a USB Cable Connection

Table of compatible drivers at www.hp.com

ProductAlternate driver
Deskjet 3320, 3325, 3420 and 3520Deskjet 3600 *
Photosmart 7560, 7565, 7600 and 7660Deskjet 5600
Deskjet 5850Deskjet 5600
Photosmart 130, 145, 230, 240 and 245Photosmart 330 *
Photosmart 7150, 7350, 7355 and 7550Deskjet 5550
Photosmart 7760 and 7960Deskjet 5600
Deskjet 6122 and 6127Deskjet 990c *
Deskjet 3820Deskjet 970cse *
Deskjet 656Deskjet 660c *
Business Inkjet 1100dBusiness Inkjet 1000
Business Inkjet 1100dtnBusiness Inkjet 1000
Deskjet 9300Deskjet 1220c *
Deskjet 9650, 9670, 9680, 9680gpDeskjet 9800
* Available only through Windows Update.

More useful HP support page:Products Supported in Windows 7

Windows 7 kms activation error - disable hibernation

Symptom
When you try to activate Windows 7, you receive an error message:
"Windows could not be activated."

Resolution
Turn off hibernation.
It was a desktop, so hibernation function was not important.
Shut down, turned off the power and given Multiple Activation Key (MAK) didn't work.

Manually:
Open an Administrator command prompt:
Disable hibernation: powercfg -h off
Enable hibernation: powercfg -h on

Automatically:
Run these Microsoft Fix it softwares:

Disable hibernation.
Re-enable hibernation.